RODE Broadcaster Condenser Microphone for Brodcasts and Vocal Voiceovers

Large-diaphragm Broadcast Condenser Mic with On-Air Indicator, and Cardioid Polar Pattern
RODE Broadcaster Condenser Microphone for Brodcasts and Vocal Voiceovers
$519.00

In Stock
In Stock Same Day Dispatch
Description

The RØDE Broadcaster is a large diaphragm, end address condenser microphone designed for broadcast voice applications.

Its response has been tailored to give a rich, full, broadcast quality with an emphasised proximity effect, making it an ideal 'on air' radio microphone, equally fitting for voice over applications for film and television.

The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.

In addition to the Broadcaster's native 20Hz-20kHz response a selectable high-pass filter at 75Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power. 

The RØDE Broadcaster is covered by a RØDE 10 year warranty. 

  • True Large Diaphragm Condenser Capsule.
  • On-Air Indicator.
  • Ultra Low Noise.
  • Cardioid Polar Pattern with high 180 rejection.
  • Voice Tailored Low Cut Filter.
  • Internal Pop Filter.
  • Internally Shock-Mounted Capsule.
  • Rugged Stainless Steel Body.

Specs

  • Acoustic Principle - Pressure Gradient
  • Active Electronics - JFET impedance converter with bipolar output buffer
  • Capsule - 1.00"
  • Polar Pattern - Cardioid - Picks up audio from the front and sides and rejects from the rear
  • Address Type - End
  • Frequency Range - 20Hz - 20kHz
  • Output Impedance -  4
  • Maximum SPL - 128dB SPL (@ 1kHz, 1% THD into 1KΩ load)
  • Maximum Output Level - 2.0dBu (@ 1kHz, 1% THD into 1KΩ load)
  • Sensitivity -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Output: 3-pin XLR
  • Power Options: 
  1. +48V phantom power required from mixer or interface
  2. +24V phantom power required from mixer or interface
  • Weight - 577 g 
  • Dimensions - 167 x 50 x 50 mm
Shipping

POSTAGE PRICES

  • Standard Delivery - Free
  • Express Delivery - $20
  • Store Pick Up (South Melbourne) - Free

Soundcorp will ship orders the first business day once all funds have cleared.

REFUNDS AND RETURNS

Purchases from Soundcorp are protected by Australian Consumer Law.

Please view our Shipping & Returns Policy page for full details.

Reviews
review yotpo