DBX Driverack PA2 Speaker Management System Details
AUTHORISED AUSTRALIAN DEALER
Soundcorp is an Authorised Australian Dealer of all items listed on our store! We provide a same day dispatch service for all orders placed before 1:00pm AEST
2 YEAR WARRANTY
The DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the DBX AutoEQ™ and AFS™ algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android®, iOS®, Mac®, or Windows® device, and updated Wizards, the DriveRack PA2 follows the legendary DriveRack legacy.
- All New Setup Wizard
- Streamlined AutoEQ™
- All New AFS™ (Advanced Feedback Suppression)
- Mobile Control (Android®, iOS®, Mac®, Windows®)
- dbx Compression
- Graphic EQ
- 8-Band Parametric EQ (adjusted when using the AutoEQ) Input
- Subharmonic Synthesis
- Crossover (supports full range, 2-way, and 3-way systems)
- 8-Band Parametric EQs (used for speaker tunings) Output
- dbx Limiting
- Driver Alignment Delays
Input: (2) line inputs. (1) RTA Mic input
Input Connectors: (2) Female XLR line inputs. (1) Female XLR RTA Mic input
Input Type: Electronically balanced/RF filtered
Input Impedance: >50 kohm
A/D Converter: dbx Type IV™ Conversion System
CMRR: > 45dB
Mic Preamp Phantom Power: +15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN): < -117dB, 22Hz-22kHz, 150 ohm (RTA)
Output: (6) Line Outputs
Output Connectors: Male XLR
Output Type: Electronically balanced, RF filtered
Output Impedance: 120 Ω
Max Output: +20dBu
A/D Dynamic Range: 112 dB A-weighted, 110 dB unweighted
Type IV Dynamic Range: 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
Input Delay Length: 100ms
Alignment Delay: 10ms per channel (60ms total)
Sample Rate: 48kHz
Dynamic Range: >110 dB A-weighted, >107dB unweighted
THD+Noise: 0.003% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk: < -110 dB, -120dB typical (input-to-output: < -100 dB)
Operating Voltage: 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
Power Consumption: 22 W
Unit Weight: 2.4 kg
Shipping Weight: 3.1 kg
Dimensions: 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
D/A Dynamic Range: 112 dB A-weighted, 110dB unweighted
1 x DBX Driverack PA2
1 x Power Cable
Detailed Shipping & Return Policy Information
- Free Delivery - 3 to 5 Days
- Express Delivey ($20) - 1 to 3 Days
- Store Pick Up (South Melbourne) - Free
Delivery Time frame
Soundcorp will ship all goods the first business day once all funds have cleared.
Refunds and Returns
Defective or dead on arrival items, will be exchanged within 14 days. Return shipping is the responsibility of the customer.
Write Your Own Review
- Soundcorp will match or beat any advertised price on products in-store and on-line.
Complete the details below and a customer support representative will contact you directly with our offer.
Limited to products offered by authorised Australian dealers.
Excludes stock liquidations & commercial quantity's.
Product for price match must be identical and brand new in the box.
Product must be in stock or readily available with an authorised vendor.
The advertised product must be freely available to purchase by any member of the public.